How do you commission a laser cutting machine to make the best use of it? In fact, machines, like people, need frequent maintenance. Only in this way can the equipment be kept in a relatively good operationting condition. There are more parts in the laser cutting machine, and some of the parts have a relatively relatively short maintenance cycle, so someone is often needed to maintain them.

1. Điều chỉnh máy lắp ráp đến cải thiện cắt hiệu ứng của máy .
①Guide rail installation:
Khi cài đặt the guide rail% 2c the guide rail nên be kept parallel. Khi nào the laser thiết bị là vận chuyển từ the factory, it needs to be debugged repeatedly to ensure the cutting effect of each machine shipped from the factory. If the guide rails are not parallel, there will be resistance when the machine is running and most of the cuts will have jagged edges, so the Y-axis guide rails need to be giữ song song.
②The cross beam and coupling are not installed in a good position:
During the installation of the crossbeam and coupling of the laser cutting machine, if there is no locking screw, or the locking parts are tilted or loose, it will affect the cutting effect of the laser cutting machine.

2. Điều chỉnh các thông số của laser cắt máy đến cải thiện cắt tốc độ của máy .

①Ban đầu tốc độ:
As the name suggests, this setting is the speed at which the machine starts. First of all, the, initial speed is not the faster the better. In fact, if the speed is too fast, the machine may shake a lot at the the beginning.


3. Các gỡ lỗi phương pháp của laser cắt máy độ chính xác
①Khi the spot of the focusing laser is adjusted to the minimum, the effect is setup through the spot shooting, and the focal position is judged by the size of the spot effect. We only need to confirm that the laser spot is at its minimum value, then this position is suitable for processing the focal length, so that you can start processing.